Power yamaha XP5000



models XP5000
Dynamic power; 1kHz 20ms nonclip 2ohms 1300W x 2
4ohms; Bridge 2600W
Output power; 1kHz 4ohms 750W x 2
8ohms 525W x 2
8ohms; Bridge 1500W
Output power; 20Hz-20kHz 4ohms 700W x 2
8ohms 500W x 2
8ohms; Bridge 1400W
70V line
100V line
General specifications XP5000
Total harmonic distortion Less than 0.1% (20Hz-20kHz; Halfpower), RL=4ohms
Intermodulation distortion Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
Frequency response +0dB, -1.0dB (RL=8ohms, 20Hz – 20kHz)
S/N ratio 103dB
Power band width 10Hz-40kHz
Crosstalk Less than -70dB
Damping factor More than 350
Voltage gain 32dB/26dB / 34.2dB (+4dBu)
Input sensitivity +6.2dBu (32dB), +12.2dBu (26dB), +4dBu
Maximum input voltage +22dBu
I/O Connectors Line input / output ports 2x XLR-3-31 type, 2x Euroblock connector
Speaker output ports 2x speakON, 2x 5-way binding post
Control ports D-sub 15pin
Processors HPF (20Hz/55Hz/OFF, 12dB/Oct)
Protection circuit Load protection Power switch on/off mute, DC-fault: Amplifier shuts down automatically.(Operation not restored automatically), Clip limiting (THD ≥ 0.5%)
Amplifier protection Thermal (Mute the output; heatsink temp ≥ 90°C; Operation not restored automatically), VI limiter (Limit the output, RL ≤ 1ohm)
Power supply protection Thermal (Amplifier shuts down automatically; heatsink temp ≥ 100°C)
Amplifier class EEEngine
Cooling 2x Variable-speed fan
Power requirements Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz
Power consumption Music source equivalent 500W
Idling 35W
Stand-by 5W
Dimensions W 480mm; 18-7/8in
H 88mm; 3-7/16in (2U)
D 456mm; 17-15/16in
Net weight 14.0kg; 30.9lbs